(Note: there is a space in between “printui.exe” and “/s”)ĩ.) Look for HP Printer driver. If you see it listed right-click on it and choose ' Delete' or 'Remove Device'Ħ.) Open up the run command with the " Windows key + R" key combo.ħ.) Type printui.exe /s and click Ok. If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar recommend you root uninstall the printer and then reinstall it and check if it helps.ġ.) In Windows, search for and open Programs and featuresĤ.) In Windows, search for and open Devices and printersĥ.) In the Devices and Printers windows look for your HP printer. If you receive a prompt to print a calibration page, do so.Īlso ensure the printer has the latest Firmware. Reinsert the ink cartridges, and then close the ink cartridge access door.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed. The printer lights might flash, and the carriage might move. The printer might go through a warm-up period. Turn on the printer, if it does not automatically turn on. Reconnect the power cord to the rear of the printer. NOTE: HP recommends connecting the printer power cord directly to a wall outlet. Plug the power cord back into the wall outlet. With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip. Remove the ink cartridges from the printer and clean the electrical contacts with lint free cloth If your printer has a network or wireless connection, leave it connected.
Disconnect the USB cable from the rear of the printer. Wait until the printer is idle and silent before you continue. Have gone through your Post and I would like to help
0 kommentar(er)
